• 高能快速充电：它在能量密度和充电速度方面具有双重优势，直接提高了终端产品的电池寿命和效率。
• 大规模生产：全自动生产线实现了最终的性价比。
• 安全性和稳定性：全过程的高一致性控制和成熟的安全设计。
• 灵活的解决方案：我们提供定制化的电池设计和集团技术指导，帮助您的产品快速推出，实现差异化竞争。

• 高能量密度：我们的电池能够在相对紧凑的尺寸内储存大量的电能。
• 快速充电：您的电池组支持快速充电技术，允许快速补充电力。
• 安全：我们的电池组设计有安全机制 以防止过充电、过放电、过热和短路。
• 轻便： 34克~850克（不同尺寸，不同重量）。
• 可用的容量选项：我们提供多种不同容量的选项，以满足您的具体需求。

• High energy density:Compact and lightweight for easy portability, storing sufficient power for outdoor needs.
• Long cycle life：High-quality cells enable hundreds to thousands of charge-discharge cycles, offering low long-term cost.
• Good safety:Built-in battery management system provides overcharge, over-discharge, short circuit, and temperature protection.
• Stable output：Pure sine wave inverter technology ensures low voltage fluctuation, safely powering various sensitive electronics.
• Strong adaptability:Wide operating temperature range, shockproof, dustproof, and water-resistant design, reliable in harsh outdoor conditions.

• 能量密度较高：体积小、重量轻，便于携带，可存储足够电量满足户外用电需求。
• 循环寿命长：采用优质电芯，可反复充放电数百至上千次，长期使用成本低。
• 安全性好：内置电池管理系统，具备过充、过放、短路、温控等多重保护。
• 输出稳定：纯正弦波逆变技术，电压波动小，能安全驱动各类精密电子设备。
• 适应性强：工作温度范围宽，抗震防尘防水，可在复杂户外环境下可靠运行。

MinYu fishing floats batteries are slim silver pin cells for compatible LED fishing floats. The range includes CR311, CR316, CR322, CR416, CR425, and CR435. Their cylindrical bodies and terminal pins fit compact float compartments when the correct model is selected. Sizes vary across the series.

In night fishing, an LED float provides a visible point of light on the water. Its LED and construction determine the lighting effect. These cells may suit replacement sales, tackle assortments, and float manufacturing when matched to the product.

Before ordering, check the manufacturer's specified model, diameter, length, pin design, voltage, and polarity. Similar batteries are not necessarily interchangeable. For wholesale or OEM inquiries, share the float model, required battery size, and quantity. Verify any performance or certification requirements for the cell.

Store batteries dry and packaged, away from metal objects and children. Follow installation instructions. Do not recharge primary cells or short circuit them.

UAV Battery Packs for Drone Projects

MINYU offers three UAV battery pack options with different capacities, voltages and physical sizes. The 2200mAh, 3000mAh and 10000mAh packs give drone developers and equipment buyers a clear starting point for matching a battery to a specific aircraft design.

Compare the Three Options

2200mAh, 11.1V — 3S1P

This is the smallest pack in the series. Its label specifies 2200mAh, 11.1V and a 3S1P configuration, with a marked 60C discharge rating. It has a red T-style main connector and a separate balance lead. Its nominal energy is 24.42Wh.

3000mAh, 22.2V — 6S1P

The 3000mAh pack is a 22.2V, 6S1P option with 66.6Wh of nominal energy. It also carries a marked 60C discharge rating and has a red T-style main connector and a balance lead. Check the voltage, connector and available installation space before selecting it for an aircraft.

10000mAh, 22.2V — 6S2P

The 10000mAh pack is substantially larger and heavier than the other two. Its label specifies 22.2V, 6S2P and a marked 60C discharge rating, giving 222Wh of nominal energy. The photographed pack has a yellow XT60 main connector and a separate balance lead. Confirm its final dimensions and weight against the aircraft’s battery compartment and payload allowance.

Choose by Aircraft Requirements

Capacity alone does not determine whether a pack is suitable for a drone. Start with the aircraft’s required voltage, then check connector compatibility, compartment dimensions, pack weight, current demand and charging setup. The discharge rating shown on the label should be reviewed alongside the confirmed product datasheet and the aircraft’s operating conditions.

These packs may be considered for compatible multirotor development, equipment testing and UAV projects. Actual fit and operating performance depend on the complete aircraft system. A sample fit and electrical compatibility check are recommended before a production order.

OEM and ODM Enquiries

MINYU supports discussions about battery pack requirements for UAV projects. When requesting a quotation, provide the required voltage and capacity, battery compartment dimensions, connector type, lead length, expected current demand and target quantity. Share your aircraft model or technical drawing when available so the pack configuration can be reviewed against the application.

Frequently Asked Questions

Can the 11.1V and 22.2V packs be interchanged?
No. Select the voltage required by the aircraft and its power system.

Does a higher capacity guarantee a longer flight time?
Flight time depends on the complete aircraft, including its power demand and the battery’s added weight. Compare packs using the intended aircraft and test conditions.

What does 60C mean on these packs?
60C is the discharge-rate marking printed on the supplied product labels. Confirm the applicable current limits a